Gr1 titanium sheet

Gr1 titanium sheet CP titanium Thickness: 0.3~60mm, Width:2000mm max ASTM B265, ISO 9001:2000 Hot rolled & Cold rolled

                                          Titanium  Gr1 sheet

Thickness: 0.3~60mm, Width: 2000mm max

ASTM B265, ISO 9001:2000

Hot rolled & Cold rolled

Delivery in advance accepted

Titanium sheet:

1. Material: CP titanium and titanium alloy, Gr1, Gr2, Gr3, Gr4, Gr5, Gr7, Gr9, Gr10, Gr11, Gr12, Gr17, Gr19, Gr23

Descriptions:

Cp grade 1 can be used in the deep drawing parts for its good elongation and excellent corrosion-resistance.

Cp grade 2 is used the most widely in the commercially pure titanium.

Cp grade 3 is almost only used in pressure vessel.

Cp grade 4 can be used in some fitting parts and fastening pieces, but for complex shape need 300 degree celsius to form.

Alloy grade 5, Ti-6Al-4V, is the most widely used in the titanium alloys because of its comprehensive mechanical, physical and chemical properties.

Alloy grade 7, add little palladium in cp titanium and it has the most excellent corrosion-resistance. Of course it costs higher.

Alloy grade 9, Ti-3Al-2.5V, is the most widely used in the golf clubs and bicycle girders.

Alloy grade 12, it has the similar properties with the grade 7 but costs less.

Alloy grade 23, Ti-6Al-4V ELI(Extra Low Interstitial) can be used in the medical appliance.

3.Specifications:

The minimum thickness is 0.3mm, and max can reach 60mm.

The width can reach to 2000mm, but it related to the thickness, if the thickness is too small, the width can not reach 2000

4.All the titanium plates are the material by titanium sponge made in Zunyi, Guizhou Province, which is very famous for its titanium sponge product.

5.The third praty test is accepted. And the certificates and documents requested by customers will be provided.

 6.General Information of the Titanium Plates:

Grades	Technology	Status	Specifications(mm)
			Thickness	Width	Length
Gr1, Gr2, Gr3, Gr4, Gr5, Gr7, Gr9, Gr10, Gr11, Gr12, Gr19, Gr23, A1	Hot rolled	R M	>4.75~60.0	400~3000	1000~4000
	Cold rolled	Y M ST	0.30~6.0	400~1000	1000~3000
TB2 (Ti-5Mo-5V-3Cr-3Al )	Hot rolled	ST	>4.0~10.0	400~3000	1000~4000
	Cold rolled	ST	1.0~4.0	400~1000	1000~3000
TB5, TB6, TB8	Cold rolled	ST	0.30~4.75	400~1000	1000~3000
Note: The minimum thickness of CP titanium plates is 0.3mm. The requests for other sizes are acceptable.

 7.Allowable Deviation of Thickness(mm):

Header: Width-W;  Allowable Deviation of Thickness-- AD;  Thickness-T

T -AD-W	400~1000	>1000~2000	>2000
0.3~0.5	±0.05	——	——
>0.5~0.8	±0.07	——	——
0.8~1.1	±0.09	——	——
>1.1~1.5	±0.11	——	——
>1.5~2.0	±0.15	——	——
>2.0~3.0	±0.18	——	——
>3.0~4.0	±0.22	——	——
>4.0~6.0	±0.35	±0.40	——
>6.0~8.0	±0.40	±0.60	±0.80
>8.0~10.0	±0.50	±0.60	±0.80
>10.0~15.0	±0.70	±0.80	±1.00
>15.0~20.0	±0.70	±0.90	±1.10
>20.0~30.0	±0.90	±1.00	±1.20
>30.0~40.0	±1.10	±1.20	±1.50
>40.0~50.0	±1.20	±1.50	±2.00
>50.0~60.0	±1.60	±2.00	±2.50

Gr1 titanium sheet